Note: You cannot delete a multi-code that is required by the Dentrix Ascend.
To edit a multi-code
How to get there
If you are not already viewing the correct location, select it on the Location menu.
On the Settings menu, under Production, click (or tap) Procedure Codes & Conditions.
The Procedure Codes & Conditions page opens.
On the Procedure Codes tab of a location's Procedure Codes & Conditions page, select a multi-code.
To quickly locate a multi-code, type a code or description in the Search for specific procedure box near the top of the page.
To filter the list of procedure codes, in the View list, select whether you want to view all procedures, only the favorites (most commonly used procedures), only active procedures, or only inactive procedures.
The Edit Procedure Code dialog box appears.
Change the description and office code, add and remove procedure codes, and set up the other options as needed.
Set up the following options:
Description - Enter a description for the multi-code. You can search for multi-codes by the description wherever you can enter a procedure.
Office Code - Enter a shorthand version of the description for this multi-code.
Add to favorites - Favorite multi-codes are the ones you use most commonly. Set this switch to Yes to mark this multi-code as a favorite so that you have quick and easy access to the multi-code when you are charting procedures. Favorites have a yellow star next to them in the list of procedure codes on the Procedure Codes & Conditions page.
Active - To make the multi-code available for selection wherever procedure codes can be selected, set the switch to Yes. To make the multi-code not available, set the switch to No.
Procedures - Do one of the following:
For a standard multi-code - Begin typing a procedure code or description in the Add a procedure here box, continue typing as needed to narrow the results list, and then click (or tap) the desired procedure (if the procedure has surface options, see the third note below for instructions on how to specify surfaces). Repeat this as needed to add other procedure codes to this multi-code.
You cannot add a procedure code that requires a surface selection and a procedure code that requires a tooth selection to the same multi-code. If you have already added a procedure code that requires a surface or a tooth selection, when you search for another procedure code to add, only the allowed procedure codes are available for selection.
You cannot add a procedure code for a quadrant or an arch to a multi-code.
A procedure that requires a treatment area (such as a tooth or surface) to be selected when this multi-code is charted or posted has a tooth icon on it.
A procedure that requires one or more surfaces to be selected when this multi-code is charted or posted has an orange bar on it (in addition to a tooth icon). If the surface options for a procedure are not already being displayed, click (or tap) that procedure; then, you can select the Surfaces and then whether or not the surfaces are Class 5.
To remove a procedure code from this multi-code, click (or tap) the corresponding X button.
For a bridge multi-code - For the Pontic procedure code, begin typing a procedure code or description in the search box, continue typing as needed to narrow the results list, and then click (or tap) the desired procedure. For the Retainer procedure code, begin typing a procedure code or description in the search box, continue typing as needed to narrow the results list, and then click (or tap) the desired procedure.
You can add an alias procedure code and a custom procedure code to a multi-code.
You can add any number of procedure codes to a multi-code.
You cannot add a multi-code to a multi-code.
You cannot edit or delete the procedures of the wisdom tooth extraction multi-code that is provided by default with Dentrix Ascend.
Click (or tap) Save.